游泳池加藥泵常用使用方法，很多人都不知道
隨著社會的不斷發展，人們的生活水平日趨提高，游泳池在很多新建的小區樓盤里越發增多，大家空閑之余都去附近的游泳池游泳休閑。那么游泳池加藥泵是如何使用的呢？很多人都不知道。下面，上海龍亞泵閥的小編來為您一一道來：
1、加藥泵(一般也稱計量泵)系列產品采用玻璃纖維增強聚丙烯，密封等級IP65。防水設計，可避免化學腐蝕、生銹和外部沖擊損傷。有許多不同的安裝方法可供選擇。
2、是一種適用于各種循環水處理設備，包括循環冷卻水和循環水處理設備。
3、LMG型加藥泵的性能采用現代高科技手段進行測試、測試和測試，通過選用優質材料和強大的實驗測試，以及較長的扭矩耐久壽命，每臺泵出廠前已在Z大流量工況下使用15小時以上。
4、游泳池加藥泵通過加藥泵將化學物質緩慢加入水中，以維持酸堿平衡。其中一些直接在噴嘴處添加，效果優于直接添加。然而，直接連接的缺點是工作量大。絮凝劑Z的靜態沉降時間小于6小時，如果游泳池較深，則需要較長的時間。PH平衡系統：游泳池水的酸堿平衡對消毒劑的功效、水的腐蝕性和刺激性有很大的影響。建議每個系統配備一套調節池水pH值的系統，以確定池水的pH值并保持在z值。該系統包括一個pH計（見水質監測器）和一個加藥系統。每臺加藥泵的加藥量為13L/h。
好了，游泳池加藥泵的常用的幾種使用方法，更多游泳池加藥泵相關資訊歡迎繼續關注上海龍亞泵閥技術部信息。
Swimming pool dosing pump commonly used, many people do not know
With the continuous development of society, people's living standards are improving day by day. Swimming pools are more and more in many newly-built residential buildings. Everyone goes to the nearby swimming pool for swimming and leisure in their spare time. So how is the swimming pool dosing pump used? A lot of people don't know. Now, the editor of Shanghai Longya pump valve comes to tell you:
1. Dosing pump (also known as metering pump) series products are glass fiber reinforced polypropylene, sealing grade IP65. Waterproof design can avoid chemical corrosion, rust and external impact damage. There are many different installation methods to choose from.
2. It is suitable for all kinds of circulating water treatment equipment, including circulating cooling water and circulating water treatment equipment.
3. The performance of LMG type dosing pump is tested, tested and tested by modern high-tech means. Through the selection of high-quality materials, powerful experimental tests and long torque durability life, each pump has been used for more than 15 hours under Z large flow condition before leaving the factory.
4. In order to maintain the acid-base balance, the chemical substances are slowly added into the water by the dosing pump. Some of them are added directly at the nozzle, and the effect is better than that of adding directly. However, the disadvantage of direct connection is the heavy workload. The static settling time of flocculant Z is less than 6 hours. If the swimming pool is deep, it needs a long time. PH balance system: the acid-base balance of swimming pool water has a great influence on the efficacy of disinfectants, the corrosiveness and irritation of water. It is suggested that each system should be equipped with a set of system to adjust the pH value of pool water to determine the pH value of pool water and maintain it at z value. The system consists of a pH meter (see water quality monitor) and a dosing system. The dosage of each dosing pump is 13L / h.
Well, the common use of the swimming pool dosing pump, more information about the swimming pool dosing pump, welcome to continue to pay attention to the information of Shanghai Longya pump valve technology department.